보배드림

범퍼만 교환해도 되는줄알았더니, 프레임 살짝 먹었는데, 포르쉐는 쬐끔먹었다고 봐주는 것 없음

원칙이 

다 뜯어내고, 포르쉐자체 프레임머신(찌그러진 프레임 펴는 장치)으로 자동차 펴고 프레임 새로 붙이는 작업 장면.

Whats up everyone,
I thought this would help some Listers, A lot of people are left stranded looking for a trustworthy body shop to take their precious cars. I wanted to post this thread to show the damage that can be caused from a simple rear end impact. 

A customer came in for "Just a bumper Job" (his words) with some minor damage to his rear bumper on his BRAND NEW 2013 Porsche 911:bawling:

Let's take a look at this bumper job.
Here is what pulled up...
(Damage to the Right of License Plate)

번호판 오른쪽 범퍼가 좀 찌그러져서 범퍼만 바꾸면 되는 줄 알았는데 두둥
 

This is going to be easy right?...

Step one is to remove the bumper and check for additional damage...
This is what we found.

Impact bar has been smashed in like a Pepsi can...

So we further remove the bar and heat shields etc...
after proper stripping we realized the frame had damage... :yikes:

파란색이 데미지고, 데미지 입은 알루미늄 프레임 통째로 떼어내고, 새걸로 프레임 다시 붙이는게 원칙

This being an aluminum frame Porsche requires replacement, which requires removal of engine... Let the fun begin...

Once the engine was removed we further inspected the frame and found some of the welds were beginning to separate.

Once the insurance company came out to see the additional surprises they approved and we continued to remove and replace the frame

포르쉐전용 프레임머신은 수리되는 차량프레임이 이차가 만들어졌을 

당시 스펙과 동일함을 보장함 

(아래사진이 프레임머신위에 올라탄 포르쉐모습)
 

We put the car on our Frame machine made by CAR BENCH (which is the same frame machines that Porsche Prototypes their cars with) this ensures that the car is aligned to factory specs down to the Millimeter (we also have Celette Benches)! 
With the car on Jigs and the old frame out of the way we installed the new frame. (hard to see because the frame comes black)

Here you can see the Betamate seeping thru(ultra high strength glue) That bonds the frame.


Now that the frame is back in place we had the motor put back in 
Time for reassembly!!

Yes... we started it like this. Yes it was loud as ****! 
Out with the old and In with the new!

All the new parts on the way in. 
Once reassembled and tightened up, we send it to Porsche to have them clear all the codes, Align the wheels, and quality check. (Porsche dealer must do this to not void warranty) Once the car is back in our hands we send it thru our wash/detail department
Walked in on her in the shower...

And now look at that rear end!!!!!